Rulerwork 3 inch Circle Low Shank Quilting Template Rulerwork

3 inch Circle quilting rulerwork template.

This LS model is laser engraved and cut from 3/16 inch thick clear cast acrylic and is designed for guided free motion rulerwork on machines with a low shank ruler foot.

Please take the time to measure from the screw hole in the shank when the presser foot is in the down position, to the throat plate of your machine. This should measure approx. 1/2" for short shank, 3/4" for mid shank, and  1" for high shank.

This template is designed for rulerwork on a domestic sewing machine with a low shank ruler foot.

Do NOT use 3/16" thick or thinner templates with a hopping foot on a longarm. The hopping foot can jump up over the edge of the template potentially damaging your longarm.

At Angel Oak Stitchery, we manufacture our own line of rulerwork quilting templates.

1/4"  -  Longarm hopping foot and high shank ruler foot model. This model is laser engraved and cut from 1/4" thick clear cast acrylic. The 1/4" thick templates are for use with the 1/2" diameter hopping foot on a longarm or on domestic machines.  The 1/4" thick clear acrylic templates are compatible with domestic machines with a high shank 1/2" ruler foot.

3/16"  -  Low shank model. This model is designed for domestic machines with a low shank ruler foot requiring the use of the thinner templates.