Skip Navigation Website Accessibility

We carry a large variety of sewing, machine and hand quiting, machine and hand embroidery thread.  Cotton, Poly-Blends, Silks.  Check out our large selection.  If you want it and we don't have it, we will order for you.  We are your One-Stop Shop

Left Twist Vs. Right Twist Industrial Sewing Thread


Choosing the correct twist for the industrial sewing thread used in your application is an important consideration in how smoothly your manufacturing process works. That is why it's important to know the difference between left twist and right twist industrial sewing threads.

In order to understand twist and the correct application for each type, it may be helpful to first present an overview of the thread manufacturing process. Beginning with either short fibers or continuous filaments, fibers are twisted together to produce fine yarns. This is known as “singling twist” and is what gives thread its flexibility and strength. In order to balance threads when two or more plies, or individual threads, are combined to make the finished thread, a reverse twist is applied. Without this reverse twist, the yarn would separate into individual plies when used in sewing.

The process of sewing applies additional twist to the thread as it passes through the machine. Most sewing machines use a single needle; threads with a left twist, or Z-twist, are designed to pass through these needles with ease. The sewing process tends to increase the twist of this thread. 

If threads with a right twist, or S-twist, are used in these single-needle machines, the sewing process can actually untwist these threads. The result is a snarled mess which puts a quick halt to the manufacturing process. S-twist threads are appropriate for use in double-needle machines engineered specifically for use with right twist threads.

The direction of a thread's twist doesn't affect its strength, but it will seriously impair the thread's performance when it is used on an unsuitable machine. For that reason, it is important to choose a thread that was designed and engineered for use on your particular machines.


Does thread have a shelf life?

As many of you may know, I love using vintage fabrics, and vintage threads.  I inherited hundreds of threads from Grandma and Nana, and buy old thread at op-shops whenever I see it.

I estimate that 90% of my sewing is done with vintage thread, and I’ve never had a problem with it. No breakages in the machine, no breakages in clothes I wear (including ones I made over a decade ago, and still wear), no funny pulls or tension issues.

Yet over, and over on the internet I hear ‘never use old thread’, ‘thread has a shelf life’, ‘vintage thread just isn’t strong enough and doesn’t work right’, ‘old threads are thicker’.

I use new thread for commissions and when sewing with students, so I’ve been able to compare new with old on the same machines, and even on different projects in the same fabrics.  I’ve tested and tested, and just can’t find any substantial evidence that using old thread gives a substandard result compared to new thread.

I do match thread to fabric – I use my vintage cotton threads for vintage cotton and rayon fabrics, my slightly less old cotton thread for slightly less old cotton and rayon fabrics, and only use new poly/polymix thread for synthetic fabrics and knits and the occasional silk chiffon.  Polyester thread is certainly stronger for its width compared to cotton thread, but my new cottons are no stronger or thinner than my old ones.

It can’t be that it’s just that my vintage threads were stored properly, as they come from so many different sources.  I’ve got Grandma’s 20-60 year old threads, which spent their life in San Diego, Great-Aunt’s 20-35 year old threads, from Idaho and Hawaii, Nana’s 20-60 year old threads, from New Zealand, plus all the ones I pick up in op-shops around New Zealand.

I keep my thread sorted by colour, not source, so except for knowing the brands that are definitely NZ and not US threads, and the general age of different brands and spools, I have no record of where they came from after the fact.  Still, my thread fail rate is less than 1/100 spools.

The other reason given for not using vintage thread is that it creates more lint than modern thread.

First, this not entirely true  – some vintage threads may create more lint than modern threads, but a good quality vintage thread still creates less lint than a cheap modern thread.

To really check, I did a test where I cleaned my machine completely, and sewed only with vintage thread for a month, cleaned, and checked the lint accumulation, and then sewed only with brand new Mettler or Gutterman, and cleaned and checked the lint accumulation, and the difference was negligible.  Did it again – same result.  If anything, there was less lint from the vintage thread month.  (I know.  I am such a mad sewentist!  I can’t ever accept the things that sewing books say without testing).  I’d have to do thing a couple hundred more times to really get a totally accurate answer, but for now I’m comfortable that the difference isn’t a problem – especially for modern sewing machines, with fairly limited expected lifespans.

Second, even if your vintage thread is creating more lint, it’s not an issue.  Simply clean your machine regularly, which you should be doing anyway.

Have I missed something?  Is the rule about not using old threads based on a few people who inherited entire thread collections that were stored in damp places and had terrible experiences with those (because thread that gets damp does need to be thrown out)? Or do I just have the miracle vintage thread collection?

Have you heard the ‘don’t use vintage thread’ rule?  Do you use vintage thread?  Have you ever experienced a problem with it?


 

THREAD: Aurifil

THREAD: Coats & Clark

THREAD: Embroidery Thread and Floss

THREAD: Gutermann

THREAD: Mainstays

THREAD: Mettler

THREAD: Other Brands

THREAD: Signature Thread

THREAD: Sulky

THREAD: Superior Threads

 
 

Showing 211 - 240 of results
Page   1  . . .  6    7    8    9    10  . . .  64   >
Sort By:

PRODUCT

Dual Duty XP General Purpose 300 yds 210-421 Blue Coats & Clark

$2.99 $3.19

PRODUCT

Dual Duty XP General Purpose 300 yards 210-345 Williamsburg Blue Coats & Clark

$2.99 $3.19

PRODUCT

Dual Duty XP General Purpose 300 yards 210-346 Dark Navy Coats & Clark

$2.99 $3.19

PRODUCT

Dual Duty XP General Purpose 300 yards 210-377 Navy Coats & Clark

$2.99 $3.19

PRODUCT

Rayon Thread 2-ply 40wt 268d 250yds 942-1015 Medium Peach Sulky

$4.79

PRODUCT

Gutermann Tera 180 10,000m Continuous filament 100% polyester thread

$25.75 $33.99

PRODUCT  SOLD OUT

Dual Duty TEX 40 6000 Yards White

 

PRODUCT

Dual Duty All-Purpose Thread 500 Yards Art. S930 4900 Coats & Clark

$4.79

PRODUCT

1000m Polyester Poly-x-40 V1026 Brown Variegated

$5.99

PRODUCT

Isacord 1000m Polyester Pine Bark 0945

$5.99

PRODUCT

Cotton 60 wt. 219yd 9240 1464 0240 498 Tufts Blue

$3.99 $4.99

PRODUCT

Cotton 60 wt. 219yd 9240 2000 0240 02 White

$3.99 $4.99

PRODUCT  SOLD OUT

Cotton 60 wt. 875yd 9248 2000 0248 02 White

 

PRODUCT

Prewound bobbins class 15 Fil-tec Clear glide Polyester White

$8.99

PRODUCT

PolySheen Embroidery Thread 40wt 220yd 3406-3522 Blue

$3.49 $3.99

PRODUCT

Polysheen Embroidery Thread 40wt 3406-5500 Lime Drop Neon 220yd Mettler

$3.49 $3.99

PRODUCT

Polysheen Embroidery Thread 40wt 3406-3810 BLUE 220yd Mettler

$3.49 $3.99

PRODUCT

Polysheen Embroidery Thread 40wt 3406-3650 Gray 200m Mettler

$3.49 $3.99

PRODUCT

Polysheen Embroidery 40wt 3406-3900

$3.49 $3.99

PRODUCT

Rayon Thread 2-ply 40wt 268d 250yds 942-1227 Gold Green Sulky

$4.79

PRODUCT

Rayon Thread 2-ply 40wt 268d 250yds 942-1111 Pastel Orchid Sulky

$4.79

PRODUCT

Rayon Thread 2-ply 40wt 268d 250yds 942-1005 Black Sulky

$4.79

PRODUCT

Rayon Thread 2-ply 40wt 268d 250yds 942-1195 Dark Purple Sulky

$4.79

PRODUCT

Rayon Thread 2-ply 40wt 268d 250yds 942-1032 Medium Purple Sulky

$4.79

PRODUCT

Rayon Thread 2-ply 40wt 268d 250yds 942-1533 Light Rose Sulky

$4.79

PRODUCT

Rayon Thread 2-ply 40wt 268d 250yds 942-1034 Burgundy Sulky

$4.79

PRODUCT

Rayon Thread 2-ply 40wt 268d 250yds 942-561 Lipstick Sulky

$4.79

PRODUCT

Rayon Thread 2-ply 40wt 268d 250yds 942-1239 Apricot Sulky

$4.79

PRODUCT  SOLD OUT

Rayon Thread 2-ply 40wt 268d 250yds 942-1126 Tan Sulky

 

PRODUCT

Rayon Thread 2-ply 40wt 268d 250yds 942-1056 Medium Tawny Tan Brown Sulky

$4.79

 
< Previous Page        1  . . .  6    7    8    9    10  . . .  64        Next Page >