Side Cutter II - Cut N Sew Attachment Low
If image is missing, and you need one, contact us at 423-715-2908 phone or text or info@hyderhangout.com
Side Cutter II - Cut N Sew Attachment Low
Overlock cutting and sewing attachement for low shank vertical needle machines. Compatible with model that have a zigzag width of 5mm. Works with Babylock, Brother, EverSewn 15, EverSewn 20, EverSewn 25, EverSewn 30, EverSewn 30S, EverSewn X, EverSewn X2, Celine, Hero, Jasmine, Janome, Juki, Kenmore, Necchi New Home, Simplicity, Singer, White. Creates the perfect cut edge like a serger or overlock. Selecting a stitch designated for the side cutter allows you to create a beautiful finish without any adjustment on stitch settings. INSTRUCTIONS - 1. Set machine width to 5mm width. 1. Make a cut about 3/4" long in the seam line of the fabric. 2. Select a stitch, and adjust settings as needed. 3. Place the cut right section on the top of the foot guide plate. 4. Slip the left side under the presser foot. 5. Lower the presser foot and guide the fabric through the presser foot as it stitches.
Specifications
Brand
Parts Generic